GFS 200

  • An “off-grid” solution, negating the need for extensive civil works or costly connection to the main grid.
  • No running costs
  • Zero maintenance system
  • Self adjusting light levels
  • Photometry available on request


  • LED: 28 x CREE XP-G LED configured in 2 x 14 LED arrangements
  • Operation:  Average of 14 hrs per night with 5 nights backup
  • Resistance: IP65 construction
  • Controller: MPPT solar charge controller with programmable ON / OFF setting (dusk to dawn) 1-14 hours ON / 1-14 hours OFF
  • BATTERIES: 2 x sealed GEL AGM 12v 75Ah (150Ah – 1800Wh)
  • SOLAR PANEL: 225W(p) mono-crystalline panel with tempered glass and reinforced frame with backing plate
  • LAMP OUTPUT: 30W = 5,610lm / 60W = 11,220lm / 75W = 14,025lm
  • WARRANTY: Solar panel 25 yr / Battery 5 yr pro rata warranty


  • Parks and Open Spaces
  • Industrial Parks
  • Play Areas
  • Remote Public Transport Stops
  • Campus Environments

GFS 200

The GFS-200 offers an environmentally friendly, off-grid solution where traditional lighting is too costly or impractical to install. It has been identified as the most reliable, robust, virtually unbreakable Solar Street Light on the market 

Detailed Specification


28 x CREE XP-G LED configured in 2 x 14 LED banks (USA made)

30W = 5,610lm / 60W = 11,220m / 75W 14,025lm MAX.

4000K CCT, 70 CRI 187lm/W

Tiltable LED angles – 0° / 15° / 30°

Dual LED module for redundancy

Constant LED power output ensures consistent output all night

Unit Warranty

Solar Panel – 25 Years

Mounting Bracket – 5 Years

LED Light Fixture –  5 Years

Electronics – 5 Years

Battery Defect Warranty – 5 Years

Full warranty details available at


Impact resistant PEET ultra clear acrylic lens allows for evenly distributed illumination

Dual lens design offering lens mixing. (Type 3/5)

  • Type 3 (standard) – Pathway lens 135° x 85°
  • Type 5 (optional) – Spherical lens 110° x 135°


Pole and Frame

Octagonal 2 part pole – 3mm – 15mm / 0.12″ – 0.63″ mild steel with hot dipped galvanised finish and 85 micron zinc coating for corrosion resistance


Solar Panel

225W(p) mono-crystalline panel with 21% efficiency

Impact resistant tempered glass solar panel assembly with protective stone guard plate on back of panel as standard.

Anti bird spike rail (STANDARD) / stone guard (OPTIONAL)

Fixed 22° angle with 360º horizontal solar panel rotation



Deep cycle sealed GEL AGM batteries

2 x 12V – 75Ah (1800Wh)

5 nights backup power  (60hours @ 30W)


Operating Temperature

-20ºC to 60ºC / -4ºF to 140ºF


Sail Area / EPA – Complete System

0.536m2 / 5.78 FT2



ASNZS 1158.3.1 Pedestrian area (Category P) lighting

Product and component certifications listed UL E349212 LED, UL3135 Cabling, UL1598 Safety Luminaires, UL8750 LED Safety 

Certified to meet ANSI/IES RP-8-14 and ANSI/IES RP-20-14 lighting standards

3.1 P1-P12, AS60598 Australian Certified LED

Pole certified to Australian Region D Category 4 winds up to 253kph / 157mph. Global Category 5 storm rating maximum sustained winds over 156mph or 251kph


Standard Mounting Height

LED 6m / 19.68FT above grade

LED 5.4m / 17.71FT above grade / Total height 6m / 19.72FT



Crate: 191kg

Top Pole: 27kg

Bottom Pole: 83kg

Solar Charge Controller

100% All Night (30W, 5,610 lumen) custom programming available. NOTE: 60W and 75W Requires custom programming or dimming profile to maintain reliability and battery life

Monitors system vitals – LED / solar / battery & temperature

In built soft start constant current LED driver with over voltage, over current and short circuit protection

MPPT (maximum power point tracking) charging with 99% tracking efficiency

IOT Smart city ready using GFS-SAM monitoring system***

Programmable turn on hours, before sunrise